In answer too much, been cleaning on and off an hour or 2 here and there and starting to make a dent. this post has been going on for the last 2 weeks have been updating
2 rack shelving units to move resize and rewire. one housing my 2 x 3d printers. one housing my CNC router and Viynal cutter/plotter. 3rd
Both moved and have changed hight of shelving so bottom parts of the racking can be used for storage and top half for equipment.
Right after 2 weeks of 20 / 30 mins here and here it’s getting better just started on wiring last night both working 3d Printers are both wired up just got to add a raspberry pi to each on for printing capture and control.
On to the CNC and vinyl cutter and storage racking. Have moved the shelving up so I can house more storage as space is already tight in my little shed.
Right just got to wire up the CNC machine and run USB cables for CNC and Vinal cutter back to new workshop computer. It is starting to get to the stage where I can see the floor of the workshop just my desk to sort out and worktop to order for the laser desk. have put my k40 on it for the time being.
just a bit more to sort out. Then find a box to put
Well, the count down has started I ordered my K50 Chinese eBay model in the green and black configuration should be arriving at the office on the 4th march just got to get I home.
Now to get ready my old workshop pc had started to fall to bits so time for an upgraded so reconditioned my old gaming server to be my new workshop powerhouse. started to commission it last night swapped it over from the old machine time. will post some more pictures of the
