Category: Steam Deck

Posted on

Upgrading Steam deck from 512gb to 1tb

m.2 2230 1tb steam deck

After a week end at home haveing some family time as got a lot going on in the background including day job. i spotted a post on the steam deck Facebook group that scan was  doing a western digital m.2 2230 NVMe  1tb unit for £99. and just like that i have one stitting here next to me on the coutch.

Lits ot bits you will need

you are going to preform this operation you must have the following.

  • Small Philips screwdriver
  •  pry pick
  • 2230 NVMe 1tb drive 
  • Tweezers
  • NVMe enclosure usb c

Optional item

  • Steam Deck Repair Jig

Optional parts

As I haven’t been using my 3d printers for a while and had some purple petg going spare and to make my life easier. So I decided to print the Steam Deck Repair Jig by ryohazuki224 link here.

As my printer isn’t big enough to print in one go I have decided to go with the 2 septate sides so 8hrs later and I have this and am ready to take my deck a part.

Steam Deck Repair Jig

Cloaning your NVMe internal drive

clone 1tb Steam Deck

This step is purely optional as in my case I have 500gb of data on my deck and downloading will be a pain in the arse.  I have decided just to clone my internal drive to the new 1tb NVMe.

So first up i have to install my new NVMe drive  in to an enclosure I brought one off amazon cheaply just input it in to the enclosure  and plug it in.

 

Now over to the deck plug in the new drive and then hit the steam button.

got to desktop mode let i boot in to desktop.

now in desktop open up konsole. this can be done by going  steam menu>system>konsole.

now enter the following. clone command: sudo dd if=/dev/nvme0n1 of=/dev/sda oflag=sync bs=128M status=progress 

now hit enter

This took me  1364s to complete. now to swap it in to a the deck.

Opening up the steam deck

Make sure you have shutdown the deck and removed the memory card.

First up are the 4 shorter screws in the center of the deck place them together.

now the 4 outer screws they are slightly longer again place them somewhere safe.

Now using the pry pick open up the deck carefully. going around the outer edge of the deck popping it open.

Now the back cover will come away.

you will be greeted with the following.

Peel back silver foil removed screw.

remove two small screws top bottom of metal plate wiggle plate free.

Disconnect the battery cable.

now to remove the drive 

Now to reverse the procedure montage time..

Time to reboot

powered on all worked  that was well spent 30  mins and we are good to go 1tb on board all was working then tried to move a game from sd to internal storage something when bad think i should have played a game for before going bad got a stuck on steam icon. oh well going to reimage it.

Re imaging the deck

As i had planed to do this in the first place i had already prepared a image usb drive with recovery OS on it.

to do this need to go to steams web site and download the recover image. then using etcher or similar burn image to a usb key with more than 8gb on it.

As i have tried to recover the software now going to format and start over hold down volume down and power will here chirp. let go boot USB image.  

you will be greeted with 4 icons you want the one saing reimage.

using your finger tap it once and then you will be greeted with proceed button tap with finger let it do its stuff then next dialog will be reboot press with finger can now remove usb and plug back in to the mains.

will now reboot using fingers navigate and set it back up.

all working fine not sure what i did wrong. but all fixed.

again worth the £99 sorry no images of this part but you get the idea.

Posted on

Set up of my steam Deck and review

Right, let’s get started as I have confirmation my steam deck is packed and about to leave the USA to me I am getting myself ready for this end as I am hoping to get it before i travel to holiday home.

so first up I going to print the steam deck life saver as recommended from a video I watched on YouTube free to download here by LWC on printables.

Time for  a quick 3+ hr print.

All printed still waiting for a tracking number from steam but on with the preparation. next up sorting out my roms for a steam deck build.

I am also going to do a separate build that’s bootable on the steam deck this will be housed on 256 sd card this will have 25 games on each system going to the best of the best. that will be worked on in the back ground.  More about this at a later date..

Next i am going print a stand so over to thingiverse. and found a nice stand for just propping my machine up so this is a 13 hr print wish me luck. can be found here by ShaunDarkLord

Sliced and ready to print away it goes will check back in a few hrs. works on flat surfaces I don’t have to Meany as working on my deck on the couch. so don’t know how much use I will get out of this print.

The pre Packing my bag to go away

This is the down side to ordering a steam deck. GLS has my deck its meant to be coming parcel force yay at least i have some control of delivery by the Wednesday my order now got a GB multi courier this means Evri is delivering my deck argh no control no warning no way to change delivery dates…

any how let take my mind of thing and pre pack my bag.

Thursday get notification of parcel has been received by Evri. Friday morning get they got the package. 

11:20 your parcel is out for delivery. Now on a normal Friday this would not be a problem. But this is not a normal Friday as we are going to our holiday home. at 3pm the parcel due time is  between 4 and 6 pm eek.

 Wife is on call delaying us till 4 i have my son and have come home waiting for tumble dryer to finish now 5 packed the car time for a comfort brake  before 3 hr 30 min drive just about to leave the house when the door bell rings its my package so straight in the boot with my bundle of joy,

 

4hrs later time to play or Update and download.

I have arrived in wales and put my son to bed time to play. as I opened the brown box I am greeted with a happy message to plug the deck in and power on and so I did I then chose my language time zone and log in all going well sort of 60meg line Vs 600 Meg line in london. lots of updates and time to down load some games that take around a hour each when 40+ GB So not played a lot but all updated. have noticed a few silly things with the system. there is no way to sleep and download. there is a work around using screen dimming and leaving system on download page. as wont sleep. Note to self Elden rings probably wasn’t the best bet to down load first.

I also changed the sleep setting from 1 hr to 20 mins no way to change it back again this will probably change soon in a update.

So time to que all my games from the library leave it over night to download and install everything . 

The next afternoon.

We had stuff to do at the house also dug out a i7 pc to upgrade in a future post as want a power house down in the work shop for streaming. more on that  in a future blog and how to run ethernet out doors.

its working spent a fun few hours playing games i had downloaded off steam servers to my deck. so far blown away by the steam os and handling. of the games system.  will post a video of game play soon just building something capable of streaming

but wait there’s more i can do that just play new games on time for some old school retro gaming as this will play pretty much anything.

added my life saver to the case works well  and stops the deck falling out of the case. defiantly a  must if you have a 3d printer. well until i invest in a tough case for it.

Adding Emu Deck

As for some one who loves retro gaming this is a must for me so over to desktop mode. the first thing your going to need to add in firefox as its not pre installed so open discovery and serch for it and install it.

I also looked for ProtonUP as this is proton GT a better version installed proton.

now Firefox installed go to emu deck website and download drag the emudeck.desktop file to the desktop now go to start menu  search for konsole open it type passwd set a password now can close the console. 

now double click on emudeck.desktop this will take some time on a slow connection. i have a 1TB sd card installed and thats were my games are going to be installed so when prompted click sd and ok

then i selected expert mode and ok then next screen the ok  for the next few screen as all installed you will then prompted for password  so i enter my freshly set password and then the install will start. away it goes go make a cup of tea or coffee as this is going to take a wile. at the end. once its its done will ask for a retro achievements password free register will record all achievements so worth doing. and then your done go to your sd card and you will need to add roms to roms each system has a game folder. will need to install bios files in the bios folder now this is a gray area and i am only using backed up roms of games i own. but if your intent on getting games google is your friend.

A few days later

I have been busy coping generating artwork set for games i have added i have approx. 30 working emulators i can add more but have gone with console and handheld gaming systems and joystick compatible systems.  the reason for this is then don’t need a keyboard out to play them. still working on getting some of the emulators to work but again its just a bit of light reading should be able to solve all issue as such a great community surrounding steam deck. The updates are also coming out every few day as well so if its not working yet it will be soon.

Views so far...

Loving steam games loving how well this play most emulated systems there area  few a that are a little glitchy but the updates are coming think and fast.

This thing is very customisable with plugins as well and have also installed ducky loader and several plugins to theme the deck and show compatibility with non native games and vibrancy of the screen as well as a CSS theme builder will also be adding new start up videos. 

If your a lover of gaming this is the device for you. if you want perfection out of the box this is nearly there but with some tinkering it come close to being perfect.

Docking your deck

I have one of the 2 docks I have ordered the first dock is the jsaux as recommended by a few youtubers and I have also ordered the official dock from steam this is on its way to me. So why 2 dock well one will be permently fitted in the man cave so i can get screen shots and film mods in the future the other one will be my traveling dock. 

well all plugged in and it works great. in game mode screen turns off and my 4k tv was the interface with external 8bitdo works perfectly. i then switched to desktop mode this was a little different had 2 screens I decided i only wanted one so over to settings and display enabled the big screen as main screen and deactivated the deck screen. i have also plugged in my Logitech wireless k400 keyboard and it all works like a dream. much easier than my travel one. but that’s for home life and not life on the go. 

Protector case

I have been looking at serval different cases and this seemed the most feasible for me as will fit in standard case that the deck shipped with so at £23 was a mid ranged price its very good  nice textured grps and kick stand works well.

Will be adding more

happy so far will report more on this shorty with some videos and screen shots and things I have learn over the next month.

Posted on

Steam deck 512gb edition plans

Time to join the revolution as Q3 comes to an end i have decided to join the que.  As i do love a machine i can tinker with.  have invested in 1tb sd card for this bad boy and Bluetooth keyboard with track pack. so this post with be what I’m looking to achieve when i first get it.

Just waiting on shipping should be with me within the week. knowing my luck this will be out for delivery on the day i am traveling to wales. hopefully can get it before that or my friendly next door neighbour will take it in for me. thats worst case senario.

Accessories

Already got:

Bluetooth keyboard i have gone with a travel one as folds up nice and small and will fit in my back back on my travels.

1tb SD card A2 so 180 write speed should give me plenty of space for emu deck.

will be paring my 8bitdo SN30 Pro or got a Xbox carbon controller kicking around for it 

3d printed dock more about that in next post  as pictures been added after the post release lol

Looking for:

Dock going to look for a dock for the man cave so i can film and have stuff on the main monitor looking for one with a ethernet connector built in and eventually with m.2 port as that will come in handy but that will once I have paid the deck off.

travel bag as the case it comes in might be short lived if I get a protective case with a stand.

Protective case

Emulation

Emu deck is where i am going to start my build i am going to start off porting all the roms of the rick dangerouse  image  i will aslo be adding some backed up games from my switch and GameCube along with some ps3 and ps2 games as well.  I then might look at my wii and wii u catalog as well as tempted to try that as well.

PlayStation 4/5 remote play

its been done so i will be trying this out as well and documenting my journey as something I would love to be able to do as don’t get enough time with my PlayStation as anti gamer wife.

Steam OS

My steam liberty is very small 3 games so i will be increasing this over the next month or so.  I am looking for recommendations.

Epic game collection

going to give this mod ago as over lockdown have been adding stuff to my library

Oculus 2 support

apparently its a possible modification so will be looking at this as might be a fun addition as I don’t have a high end pc. so will be doing some reading on this too.